Power Oil Seal

O-ring Pusher Mechanical Seals… >>

TG71U

Operating range

Shaft diameter: d1=16…100mm
Pressure: p=0…1.6Mpa(232psi)
Temperature: t = -20 °C …200 °C(-4°F to 392°F)
Sliding velocity: Vg≤20m/s(65.6ft/m) 

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
     Silicon carbide (RBSIC)  O
     Carbon graphite resin impregnated  Ak
     Tungsten carbide  W1
     Cr-Ni-Mo Sreel (SUS316)  G
 Stationary Seat 
     Silicon carbide (RBSIC)  O
     Carbon graphite resin impregnated  Ak

     Tungsten carbide  W1
 Auxiliary Seal 
     Fluorocarbon-Rubber (Viton)  V
     Ethylene-Propylene-Diene (EPDM)  E
     Silicone-Rubber(MVQ)  S 
     PTFE Coated VITON  M1
 Spring 
     Stainless Steel (SUS304)  F
     Stainless Steel (SUS316)  G
 Metal Parts
     Stainless Steel (SUS304)  F
     Stainless Steel (SUS316)  G

Stationary Seat

Standard Stationary Seat: T4G9 T7G9 T3G6
T4G9 equivalent to Burgmann G9
T7G9 equivalent to Burgmann G9
T3G6 equivalent to Burgmann G6

Alternatives Stationary Seat: T3G4 T8G13
T3G4 equivalent to Burgmann G4
T8G13 equivalent to Burgmann G13

 

TG90B

Operating range

Shaft diameter:  d1=16…100mm
Pressure:  p=0…1.6Mpa(232psi)
Temperature:  t = -20 °C …200 °C(-4°F to 392°F)
Sliding velocity:     Vg≤20m/s(65.6ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 

     Silicon carbide (RBSIC)  O
     Carbon graphite resin impregnated  Ak
     Antimony Impregnated Carbon  Ad
 Stationary Seat 
     Silicon carbide (RBSIC)  O
     Tungsten carbide  W1
 Auxiliary Seal 
     Fluorocarbon-Rubber (Viton)  V

     Ethylene-Propylene-Diene (EPDM)  E
 Spring 
     Stainless Steel (SUS304)  F
     Stainless Steel (SUS316)  G
 Metal Parts
     Stainless Steel (SUS304)  F
     Stainless Steel (SUS316)  G

Stationary Seat

Standard Stationary Seat: T7G16
T7G16 equivalent to Burgmann G16

Alternatives Stationary Seat:T5G46
T5G46 equivalent to Burgmann G46

TG8U

Operating range

Shaft diameter: d1=18…100mm(0.750” …4.000”)

Pressure:  p=0…2.0Mpa(290psi)
Temperature: t = -40 °C …200 °C(-40°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE Enwrap Viton M1
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T6WG
T6WG equivalent to John Crane WG

TG9U

Operating range

Shaft diameter: d1=18…100mm(0.750” …4.000”)
Pressure: p=0…2.4Mpa(348psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m) 

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Elastomer
    Pure PTFE(PTFE) T
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T26AG
T26AG equivalent to John Crane AG

Alternatives Stationary Seat: T9V
T9V equivalent to John Crane V

 

TG58U

Operating range

Shaft diameter: d1=18…100 mm          
Pressure: p=0…1.7Mpa(246.5psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°)

Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Elastomer
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE Enwrap Viton M1
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T7BP
T7BP equivalent to John Crane

BPAlternatives Stationary Seat:T3BO
T3BO equivalent to John Crane BO

TG59U

Operating range

Shaft diameter: d1=18…100 mm 

Pressure: p=0…1.7Mpa(246.5psi)

Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m) 

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1

    Silicon carbide (RBSIC) O 

    Tungsten carbide W1

 Elastomer
    Pure PTFE(PTFE) T
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T7BP
T7BP equivalent to ohn Crane BP

TG120C

Operating range

Shaft diameter: d1=12…80mm
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

  Rotary Face
     Silicon carbide (RBSIC) O
     Tungsten carbide W1
     Cr-Ni-Mo Sreel (SUS316) G
     Surface hardfacingtungsten carbide I
 Stationary Seat 
     Carbon graphite resin impregnated Ak
     Silicon carbide (RBSIC) O
     Tungsten carbide W1
 Auxiliary Seal
     Nitrile-Butadiene-Rubber (NBR) P
     Fluorocarbon-Rubber (Viton) V
     Ethylene-Propylene-Diene (EPDM) E
 Spring 
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G
     Left rotation: L Right rotation: R
 Metal Parts
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T4G9 T7G9
T4G9 equivalent to Burgmann G9 Material Carbon
T7G9 equivalent to Burgmann G9 Material Silicone

 

Alternatives Stationary Seat: T5G9 T3G6
T5G9 equivalent to Burgmann G9
T3G6 equivalent to Burgmann G6

TG120B

Operating range

Shaft diameter: d1=12…80mm
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

  Rotary Face

     Silicon carbide (RBSIC) O
     Tungsten carbide W1
     Cr-Ni-Mo Sreel (SUS316) G
     Surface hardfacingtungsten carbide I
 Stationary Seat 
     Carbon graphite resin impregnated Ak
     Silicon carbide (RBSIC) O
     Tungsten carbide W1
 Auxiliary Seal
     Nitrile-Butadiene-Rubber (NBR) P
     Fluorocarbon-Rubber (Viton) V
     Ethylene-Propylene-Diene (EPDM) E
 Spring 
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G
     Left rotation: L Right rotation: R
 Metal Parts
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T3G4
T3G4 equivalent to Burgmann G4

Alternatives Stationary Seat: T15G4 T8G13
T15G4 equivalent to Burgmann G4
T8G13 equivalent to Burgmann G13

TG120D

Operating range

Shaft diameter: d1=8…100 mm 
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1

 Stationary Seat 
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Auxiliary Seal
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation: L  Right rotation: R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T8RN T4RN

Alternatives Stationary Seat: T3RN T5RN

 

TG120A

Operating range

Shaft diameter: d1=8…100 mm 
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Cr-Ni-Mo Sreel (SUS316) G
    Tungsten carbide surfacing I
 Stationary Seat 
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Auxiliary Seal
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V

    Ethylene-Propylene-Diene (EPDM) E

    Fluorocarbon-Rubber (Viton)  V

 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation: L Right rotation: R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T8RN T4RN

Alternatives Stationary Seat: T3RN T15RN T7RN T5RN

 

TG120M

Operating range

Shaft diameter: d1=10…38mm
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O 
 Stationary Seat 
    Silicon carbide (RBSIC) O
    Aluminium Oxide Ceramic 
 Auxiliary Seal
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation:L Right rotation:R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T3G6
T3G6 equivalent to Burgmann G6

Alternatives Stationary Seat: T3G4 T1G60
T3G4 equivalent to Burgmann G4
T1G60 equivalent to Burgmann G60

TG120HB

Operating range

Shaft diameter:  d1=12…80mm
Pressure:    p=0…2.5Mpa(362.5psi)
Temperature:    t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity:   Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face

    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Antimony Impregnated Carbon Graphite Ad
 Stationary Seat 
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Cr-Ni-Mo Sreel (SUS316) G
    99% Al2O3 ceramic B1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    Silicone-Rubber(MVQ) 
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation: L Right rotation: R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T4G9
T4G9 equivalent to Burgmann G9

Alternatives Stationary Seat: T7G9
T7G9 equivalent to Burgmann G9

TG155

Operating range

Shaft diameter: d1=10…40mm
Pressure:  p=0…1.4Mpa(203psi)
Temperature: t = -40 °C …180 °C(-40°F to 356°F)
Sliding velocity:  Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Aluminium Oxide Ceramic B
 Stationary Seat 
    Hot-Pressing Carbon A
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) 
 Auxiliary Seal 
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation: L Right rotation: R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T8RN
T8RN equivalent to Burgmann RN

Alternatives Stationary Seat: T3RN
T3RN equivalent to Burgmann RN

TG8B

Operating range

Shaft diameter: d1=18…100mm(0.750”…4.000”) 
Pressure: p=0..5.8Mpa(841psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated A
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W
 Elastomer
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE Enwrap Viton M
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T6WG
T6WG equivalent to John Crane WG

TG9B

Operating range

Shaft diameter: d1=18…100mm(0.750” …4.000”)
Pressure: p=0…2.4Mpa(348psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Elastomer
    Pure PTFE(PTFE) T
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T26AG
T26AG equivalent to John Crane AG

Alternatives Stationary Seat: T9V
T9V equivalent to John Crane V

 

TG58B

Operating range

Shaft diameter: d1=18…100 mm       
Pressure: p=0…5.2Mpa(754psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°)

Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Elastomer
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE Enwrap Viton M1
 Spring
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat: T7BP
T7BP equivalent to John Crane BP

Alternatives Stationary Seat: T3BO
T3BO equivalent toJohn Crane BO

TG59B

Operating range

Shaft diameter: d1=18…100mm
Pressure: p=0…5.2Mpa(754psi)
Temperature: t = -40 °C ..+200 °C(-40°F to 392°F)

Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Carbon graphite resin impregnated Ak
 Stationary Seat 
    99% Aluminium Oxide B1
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Elastomer 
    Pure PTFE(PTFE) T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

tationary Seat

Standard Stationary Seat: T7BP
T7BP equivalent to John Crane BP

TG960

Operating range

Shaft diameter: d1=20…100mm
Pressure: p=0…1.2Mpa(174psi)
Temperature:  t = -20 °C …200 °C(-4°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Cr-Ni-Mo Sreel (SUS316) G
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated A
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE Coated VITON M1
    PTFE T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Alternatives Stationary Seat:T4LA

Standard Stationary Seat:T30LE

 

TG125

Operating range

Shaft diameter: d1=20…100mm
Pressure: p=0…1.2Mpa(174psi)
Temperature:  t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity: Vg≤25m/s(82ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    Silicone-Rubber(MVQ) 
    Nitrile-Butadiene-Rubber (NBR) P
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T4LA

Alternatives Stationary Seat: T20LF

 

TG1527

Operating range

Shaft diameter: d1=18…100mm
Pressure:  p=0…1.0Mpa(145psi)
Temperature:  t = -40 °C …150 °C(-40°F to 302°F)
Sliding velocity:  Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O

    Carbon graphite resin impregnated Ak

    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Stationary Seat:T5S43

TG102U

Operating range

Shaft diameter: d1=25…85mm
Pressure: p=0…1.2Mpa(174psi)
Temperature: t = -30 °C …180 °C(-22°F to 356°F)
Sliding velocity: Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard: T5A

Alternatives:T4A

 

TG108U

Operating range

Shaft diameter: d1=20…80mm
Pressure:  p=0…0.6Mpa(87psi)
Temperature: t = -40 °C …150 °C(-4°F to 302°F)
Sliding velocity:  Vg≤10m/s(32.8ft/m) 

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
    Cr-Ni-Mo Sreel (SUS316) G
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE T
 Spring 

  Stainless Steel (SUS304) F 

  Stainless Steel (SUS316) G

 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5F

Alternatives Seat:T4F

TG112

Operating range

Shaft diameter: d1=20…80mm
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -40 °C …150 °C(-40°F to 302°F)

Sliding velocity:    Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5A

Alternatives Seat:T4A

 

TG113

Operating range

Shaft diameter: d1=20…80mm
Pressure: p=0…1.0Mpa(145psi)
Temperature:  t = -40 °C …150 °C(-40°F to 302°F)
Sliding velocity: Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5A

Alternatives Seat:T4A

TG124

Operating range

Shaft diameter: d1=20…95mm
Pressure: p=0…1.2Mpa(174psi)
Temperature: t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity:   Vg≤15m/s(49.2ft/m) 

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5D

Alternatives Seat:T4D

TG128

Operating range

Shaft diameter: d1=18…80mm
Pressure: p=0…0.8Mpa(116psi)
Temperature: t = -20 °C …200 °C(-4°F to 392°F)

Sliding velocity:  Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    Nitrile-Butadiene-Rubber (NBR) P
    PTFE T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5S43

Alternatives Seat: T4S43 T1A

TGJB103

Operating range

Shaft diameter: d1=16…120mm
Pressure: p=0…0.8Mpa(116psi)
Temperature: t = -20 °C …80 °C(-4°F to 176°F)
Sliding velocity: Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
    Left rotation: Right rotation: R
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T4D

Alternatives Seat: T5D

 

TGJB104

Operating range

Shaft diameter: d1=16…120mm
Pressure: p=0…0.8Mpa(116psi)
Temperature: t = -20 °C …80 °C(-4°F to 176°F)
Sliding velocity:  Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face 
    Silicon carbide (RBSIC) O
    Tungsten carbide W1
 Stationary Seat
    Silicon carbide (RBSIC) O
    Carbon graphite resin impregnated Ak
    Tungsten carbide W1
 Auxiliary Seal 
    Fluorocarbon-Rubber (Viton) V
    Ethylene-Propylene-Diene (EPDM) E
    PTFE T
 Spring 
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G
 Metal Parts
    Stainless Steel (SUS304) F
    Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T4D

Alternatives Seat: T5D

TG802

Operating range

Shaft diameter:  d1=20…80mm
Pressure: p=0…0.5Mpa(72.5psi)
Temperature:   t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity:  Vg≤13m/s(42.6ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face   
    Silicon carbide (RBSIC) O
    Tungsten carbide W1 
 Stationary Seat 
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Tungsten carbide W
 Auxiliary Seal
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V
 Spring
    Stainless Steel (SUS304) F
 Metal Parts
    Stainless Steel (SUS304) F

Stationary Seat

Standard Seat: T7G9

Alternatives Seat: T5G9 T4G9

 

TG804

Operating range

Shaft diameter:  d1=20…80
Pressure: p=0…0.5Mpa(72.5psi)
Temperature:   t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity:  Vg≤10m/s(32.8ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face    
    Silicon carbide (RBSIC) O
    Tungsten carbide W
 Stationary Seat 
    Carbon graphite resin impregnated Ak
    Silicon carbide (RBSIC) O
    Tungsten carbide W
 Auxiliary Seal
    Nitrile-Butadiene-Rubber (NBR) P
    Fluorocarbon-Rubber (Viton) V
 Spring
    Stainless Steel (SUS304) F
 Metal Parts
    Stainless Steel (SUS304) F

Stationary Seat

Standard Seat: T7G9 equivalent to Burgmann G9

Alternatives Seat: T5G9 T4G9
T4G9 equivalent to Burgmann G9

 

TG120

Operating range

Shaft diameter: d1=12…80mm
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -20 °C …180 °C(-4°F to 356°F)
Sliding velocity: Vg≤15m/s(49.2ft/m)

Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials

 Rotary Face
     Silicon carbide (RBSIC) O
     Tungsten carbide W1
     Cr-Ni-Mo Sreel (SUS316) G
     Surface hardfacingtungsten carbide I
 Stationary Seat 
     Carbon graphite resin impregnated Ak
     Silicon carbide (RBSIC) O
     Tungsten carbide W1
 Auxiliary Seal
     Nitrile-Butadiene-Rubber (NBR) P
     Fluorocarbon-Rubber (Viton) V
     Ethylene-Propylene-Diene (EPDM) E
 Spring 
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G
     Left rotation: Right rotation: R
 Metal Parts
     Stainless Steel (SUS304) F
     Stainless Steel (SUS316) G

Stationary Seat

Standard Seat: T5A

Alternatives Seat:T4A