Power Oil Seal
Elastomer Bellows Mechanical Seal… >>

TG502B
Operating range
Shaft diameter: d1=14…100 mm
Pressure: p=0…2.8Mpa(406psi)
Temperature: t = -40 °C …200 °C(-40°F to 392°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Silicon carbide (RBSIC) O
Hot-Pressing Carbon Ac
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat Standard
Stationary Seat: T3BO T3BO equivalent to John Crane BO

TG109
Operating range
Shaft diameter: d1=8…100 mm
Pressure: p=-0.1…1.6Mpa(-14.5psi….232psi)
Temperature: t = -20 °C ..+140 °C(-4°F to 284°F)
Sliding velocity: Vg≤10m/s(32.80ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materia

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat: T1G60
T1G60 equivalent to Burgmann G60 Seat
Alternatives Stationary Seat:T3G6 T3G4 T1G50
T3G6 equivalent to Burgmann G6 Seat
T3G4 equivalent to Burgmann G4 Seat
T1G50 equivalent toBurgmann G50 Seat


TG560
Operating range
Shaft diameter: d1=8…80mm(0.375” …3.000”)
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -20 °C …150 °C(-4°F to 302°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated AK
Silicon carbide (RBSIC) O
Hot-Pressing Carbon AC
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat: T1G60
T1G60 equivalent to Burgmann G60 SeatAlternatives Stationary Seat:T3G6 T3G4 T1G50
T3G6 equivalent to Burgmann G6 Seat
T3G4 equivalent to Burgmann G4 Seat
T1G50 equivalent toBurgmann G50 Seat



TG31
Operating range
Shaft diameter: d1=10…75mm(0.375” …3.000”)
Pressure: p=0…1.5Mpa(217.5psi)
Temperature: t = -20 °C …150 °C(-4°F to 302°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat:T1NG,T1N
T1NG equivalent to John Crane NG
T1N equivalent to John Crane
Alternatives Stationary Seat:T6WG,T6W
T6WG equivalent to John Crane WG
T6W equivalent to John Crane W


TG1
Operating range
Shaft diameter: d1=16…75mm(0.625” …3.000”)
Pressure: p=0…1.7Mpa(246.5psi)
Temperature: t = -40 °C …200 °C(-40°F to 392°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Tungsten carbide W1
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat:T1NG,T1N
T1NG equivalent to John Crane NG
T1N equivalent to John Crane N
Alternatives Stationary Seat:T6WG,T6W
T6WG equivalent to John Crane WG
T6W equivalent to John Crane W


TG2
Operating range
Shaft diameter: d1=16…75mm(0.625” …3.000”)
Pressure: p=0…1.7Mpa(246.5psi)
Temperature: t = -40 °C …200 °C(-40°F to 392°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Tungsten carbide W1
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary SeatStandard
Stationary Seat:T1NG,T1N
T1NG equivalent to John Crane NG
T1N equivalent to John Crane N
Alternatives Stationary Seat:T6WG,T6W
T6WG equivalent to John Crane WG
T6W equivalent to John Crane W


TG2100
Operating range
Shaft diameter: d1=10…75mm(0.375” …3.000”)
Pressure: p=0…1.2Mpa(174psi)
Temperature: t = -20 °C …150 °C(-4°F to 302°F)
Sliding velocity: Vg≤13m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat:T1M
T1M equivalent to John Crane M
Alternatives Stationary Seat:T3BS
T3BS equivalent to John Crane BS
Standard Stationary Seat:T1NG (inch size)
T1NG equivalent to John Crane NG



TG110
Operating range
Shaft diameter: d1=13…..40mm
Pressure: p=0…0.4Mpa(58 psi)
Temperature: t = -40 °C ..+150 °C(-40°F to 302°F)
Sliding velocity: Vg≤10m/s(32.80ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304,SUS316) F
Metal Parts
Stainless Steel (SUS304,SUS316) F

Stationary Seat
TG110 standard stationary seat

TGE
Operating range
Shaft diameter: d1=0.375” …1.000”
Pressure: p=0…0.5Mpa(72.5psi)
Temperature: t = -30 °C …180 °C(-22°F to 356°F)
Sliding velocity: Vg≤3600r/min
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat:T1NG
T1NG equivalent to John John Crane NG

TG16
Operating range
Shaft diameter: d1=0.375” …1.000”
Pressure: p=0…1.0Mpa(145psi)
Temperature: t = -30 °C …180 °C(-22°F to 356°F)
Sliding velocity: Vg≤10m/s(42.6ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

Stationary Seat
Standard Stationary Seat:T1NG
T1NG equivalent to John John Crane NG

TG301
Operating range
Shaft diameter: d1=6…70 mm
Pressure: p=0…0.4Mpa(58 psi)
Temperature: t = -20 °C ..+150 °C(-4°F to 302°F)
Sliding velocity: Vg≤10m/s(32.8ft/s)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Silicon carbide (RBSIC) O
Hot-pressing carbon Ac
Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
Metal Parts
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G

Stationary Seat
Standard Stationary Seat:T1RA

TG156
Operating range
Shaft diameter: d1=8…16 mm
Pressure: p=0…0.4Mpa(58psi)
Temperature: t = -20 °C …150 °C(-4°F to 302°F)
Sliding velocity: Vg≤10m/s(32.8ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
Metal Parts
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G

Stationary Seat
TG156 standard seat

TG6B
Operating range
Shaft diameter: d1=10…30m(0.375” …0.750”)
Pressure: p=0…0.3Mpa(43.5psi)
Temperature: t = -35 °C …150 °C(-31°F to 302°F)
Speed: n≤5000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Silicon carbide (RBSIC) O
Stationary Seat
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Hydrogenated nitrile-butadiene rubber(H-NBR) H
Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
Metal Parts
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G

TG6C
Operating range
Shaft diameter: d1=10…20mm
Pressure: p=0…0.3Mpa(43.5psi)
Temperature: t = -35 °C …150 °C(-31°F to 302°F)
Speed: n≤6000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Silicon carbide (RBSIC) O
Stationary Seat
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Hydrogenated nitrile-butadiene rubber(H-NBR) H
Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
Metal Parts
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G

TG6SB
Operating range
Shaft diameter: d1=10…30mm
Pressure: p=0…0.3Mpa(43.5psi)
Temperature: t = -35 °C …150 °C(-31°F to 302°F)
Speed: n≤5000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Silicon carbide (RBSIC) O
Stationary Seat
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Hydrogenated nitrile-butadiene rubber(H-NBR) H
Spring
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G
Metal Parts
Stainless Steel (SUS304) F
Stainless Steel (SUS316) G

TG208
Operating range
Shaft diameter: d1=10…45
Pressure: p=-0.05…0.16Mpa(23.2psi)
Temperature: t = -20 °C …80 °C(-4°F to 176°F)
Sliding velocity: n≤3000r/min
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing Carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG4701
Operating range
Shaft diameter: d1=16…55
Pressure: p=0…0.3Mpa(43.5psi)
Temperature: t = -20 °C …80 °C(-4°F to 176°F)
Sliding velocity: n≤3000r/min
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing Carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304( F
TG4702
Operating range
Shaft diameter: d1=12…50
Pressure: p=-0.05…0.3Mpa(43.5psi)
Temperature: t = -20 °C …70 °C(-4°F to 158°F)
Sliding velocity: n≤3000r/min
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Hot-Pressing Carbon Ac
Silicon carbide (RBSIC) O
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG108
Operating range
Shaft diameter: d1=8…..55mm
Pressure: p=0…0.6Mpa(87 psi)
Temperature: t = -20 °C ..+150 °C(-4°F to 302°F)
Sliding velocity: Vg≤8m/s(26.20ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination material

Combination Materials
Rotary Face
Aluminium oxide B
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG104
Operating range
Shaft diameter: d1=12…..45mm
Pressure: p=0…0.6Mpa(87 psi)
Temperature: t = -20 °C ..+150 °C(-4°F to 302°F)
Sliding velocity: Vg≤8m/s(26.20ft/m)
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG103
Operating range
Shaft diameter: d1=12…..18mm
Pressure: p=0…0.4Mpa(58 psi)
Temperature: t = -20 °C ..+150 °C(-4°F to 302°F)
Sliding velocity: Vg≤3000r/m
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Carbon graphite resin impregnated Ak
Silicon carbide (RBSIC) O
Hot-Pressing Carbon Ac
Stationary Seat
Aluminium oxide(Ceramic) B
Silicon carbide (RBSIC) O
Tungsten carbide W1
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG102
Operating range
Shaft diameter: d1=14…..20mm
Pressure: p=0…0.3Mpa(43.5 psi)
Temperature: t = -20 °C ..+80 °C(-4°F to 176°F)
Sliding velocity: Vg≤3000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Stationary Seat
Aluminium oxide B
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TG101
Operating range
Shaft diameter: d1=16…..25mm
Pressure: p=0…0.4Mpa(58 psi)
Temperature: t = -20 °C ..+80 °C(-4°F to 176°F)
Sliding velocity: Vg≤3000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Silicon carbide (RBSIC) O
Stationary Seat
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Carbon graphite resin impregnated Ak
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F

TGXB
Operating range
Shaft diameter: d1=25…..35mm
Pressure: p=0…0.4Mpa(58 psi)
Temperature: t = -20 °C ..+150 °C(-4°F to 302°F)
Sliding velocity: Vg≤3000m/s
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials

Combination Materials
Rotary Face
Aluminium oxide B
Silicon carbide (RBSIC) O
Stationary Seat
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
Spring
Stainless Steel (SUS304) F
Metal Parts
Stainless Steel (SUS304) F
